Torque Limiters

The Hercus Torque Limiter is an adjustable friction drive when set prevents over loading, when the preset load is reached the limiter will slip dis-engaging the drive.  The moment the load falls below the preset, the limiter will re-engage and will resume driving.

The selected driving plate* (i.e. Sprocket, Gear etc.) is mounted on a self lubricating bush that is carried on the hub and held between two friction disks.  The load desired is applied to the pressure plate by the Disc spring or springs.

*Please Note (Driving Plates are options - not supplied with standard Torque Limiter - Hercus can supply and fit at time of order at addtional cost.)

 

Download Information and Data for Hercus Torque Limiters

Download the Hercus Couplings Cataloge

Download the complete Hercus Engineering Cataloge     


Link to
Transmission Home Page

Links to other Hercus Couplings
HRC Flexible Couplings

Chain Shaft Couplings

Spline Clutches

Torque Limiters

Torque Limiter Couplings
 

 

 

 

(c) Copyright  2008   F.W. Hercus Pty. Ltd.
All trademarks, Registered Names and Logos belong to their respective companies.

While every care has been taken to ensure the accuracy of information
contained in this data sheet,  no liability will be accepted for errors or ommisions.